MYSHOP

최근 본 상품

이전 제품

다음 제품

현재 위치
  1. 신제품

PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C] ( 파워 부스터 충전기 - 5V 리튬 폴리머 USB 부스트 )

(해외배송 가능상품)
공급사 바로가기
기본 정보
상품명
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C] ( 파워 부스터 충전기 - 5V 리튬 폴리머 USB 부스트 )
판매가
12,727원
원산지
USA
상품코드
P000LIXF
수량
수량증가수량감소
세액
1,273원
공급사
Adafruit
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C] ( 파워 부스터 충전기 - 5V 리튬 폴리머 USB 부스트 ) 수량증가 수량감소 (  0)
총 상품금액(수량) : 0 (0개)

 

상품상세정보



Description

PowerBoost 1000C is the perfect power supply for your portable project!With a built-in load-sharing battery charger circuit you'll be able to keep your power-hungry project running even while recharging the battery!This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery and convert the battery output to 5.2V DC for running your 5V projects.

If you dont need the 1A battery charger smart load-sharing or 1A iOS resistors check out the Powerboost 500C

Like our popular5V 1A USB wall adapter we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' for long cables high draw the addition of a diode on the output if you wish etc. The 5.2V is safe for all 5V-powered electronics like Arduino Raspberry Pi or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance.

The PowerBoost 1000C has at the heart aTPS61090 boost converter from TI. This boost converter chip has some really nice extras such as low battery detection 2A internal switch synchronous conversion excellent efficiency and 700KHz high-frequency operation. Check out these specs!

  • Synchronous operation means you can disconnect the output completely by connecting the ENable pin to ground. This will completely turn off the output
  • 2A internal switch (~2.5A peak limiting) means you can get 1000mA+ from a 3.7V LiPoly/LiIon battery. Just make sure your battery can handle it!
  • Low battery indicator LED lights up red when the voltage dips below 3.2V optimized for LiPo/LiIon battery usage
  • Onboard 1000mA charge-rate 'iOS' data resistors. Solder in the USB connector and you can plug in any iPad iPhone or iPod for 1000mA charge rate.
  • Full breakout for battery in control pins and power out
  • 90%+ operating efficiency in most cases (see datasheet for efficiency graphs) and low quiescent current: 5mA when enabled and power LED is on 20uA when disabled (power and low batt LED are off)

To make this even more useful we stuck a smart load-sharing Lipoly charger on the other side. The charger circuitry is powered from a microUSB jack and will recharge any 3.7V/4.2V LiIon or LiPoly battery at 1000mA max rate. There's two LEDs for monitoring the charge rate a yellow one tells you its working a green one lights up when its done.

Since the built-in battery charger has load-sharing it will automatically switch over to the USB power when available instead of continuously charging/draining the battery. This is more efficient and lets you charge-and-boost at the same time without any interruption on the output so its fine for use as a "UPS" (un-interruptable power supply).

Just be aware that the charge rate is 1000mA max and there's some inefficiency during the boosting stagesomake super sure that the USB adapter you're using to charge with is high quality can supply 2A and has thick power wires.This one from Adafruit is ideal and has been tested lower quality ones will not act well due to the voltage drop on the wires or droop on the power supply. This isespecially true if you're actually drawing 1000mA out of the PowerBoost 1000C the MCP73871 maxes out at 1.8A.

This charger-booster is great for powering your robot Arduino project single-board-computer such as Raspberry Pi or BeagleBone! Each order comes with one fully assembled and tested PCB and a loose USB A jack. If you are powering your project from USB solder the USB A jack in (a 3-minute soldering task).If you would like to use a terminal block pick up a 3.5mm 2pin block hereand solder to the output spot where the USB jack would go. Or dont solder anything in for a more compact power pack.

If you're trying to figure out how much current your project is using check out theCHARGER DOCTOR!

You may get an off-white or black JST connector.

Technical Details

  • 23mm x 45mm x 10mm / 0.9" x 1.8" x 0.4"
  • Weight: 6g

    Learn

    Retropie in your pocket!
    A powerful rechargeable battery pack with load-share
    Hack your existing charger and build your own portable charger
    Build a tiny handheld raspberry pi portable computer
    Make a portable Raspberry Pi
    Build a battery powered raspberry pi camera or general computer monitor
    Mapped for Livestream Studio switch streams with big ole buttons
    Slim and portable!
    Boost your cell phone or mobile device with this 3-D printed battery and charger
    3W of blindingly bright LEDs - controllable with a single pin
    Slim case for a portable touch Pi!
    Make a portable Raspberry Pi 2 game console
    Explore the apocalypse with a trusty Pi
    Portable RetroPi with the smallest Pi yet
    Data is Power! But power is not data - unless you know which wires to connect.


    상품결제정보

    * 세금계산서 발행방법은 게시판 공지사항 참조.
    * 기술문의는 이메일(
    master@toolparts.co.kr)로 문의.

    전자부품 특성상 제품에 이상이 있거나, 상품정보와 상이한 경우 외 에 단순 고객변심으로는
    교환 반품이 불가능 합니다 구매전 이점 유의해 주세요!!!

    고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

    무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
    주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

    배송정보

    • 배송 방법 : 택배
    • 배송 지역 : 전국지역
    • 배송 비용 : 3,000원
    • 배송 기간 : 1일 ~ 3일
    • 배송 안내 : 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
      주문하신 제품은 입금확인후 1~3일 내에 출고되며 (해외배송)으로 표시된 제품은
      해외배송 제품으로 배송기간이 약 10일~14일정도 소요될수 있습니다.
      구매전 해외배송 제품은 배송기간을 꼭 확인해 주세요.
      해외배송 진행하신상품은 반품 불가능 합니다.

    교환 및 반품정보

    교환 및 반품이 가능한 경우
    - 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
      경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
    - 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
      다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

    교환 및 반품이 불가능한 경우
    - 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
      포장 등을 훼손한 경우는 제외
    - 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
      (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
      따른 반품/교환은 제조사 기준에 따릅니다.)
    - 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
      제공한 경우에 한 합니다.
    - 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
    - 복제가 가능한 상품등의 포장을 훼손한 경우
      (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

    ※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
      (색상 교환, 사이즈 교환 등 포함)


    서비스문의

    상품사용후기

    상품의 사용후기를 적어주세요.

    게시물이 없습니다

    상품문의하기 모두 보기

    상품 Q&A

    상품에 대해 궁금한 점을 해결해 드립니다.

    게시물이 없습니다

    상품문의하기 모두 보기