This module performance is stable, measure the distance accurately. Energy and foreign SRF05, SRF02 ultrasonic distance measuring module and other comparable.Module precision, blind spots (2cm) super close, stable ranging success of this product to the market is strong under!
The main technical parameters:
1 Voltage: DC5V
2 Quiescent current: less than 2mA
3 level output: high- 5V
4 level output: Low 0V
5 Sensor angle: not more than 15 degrees
6 Detection distance: 2 cm -45 0cm
7 High precision: up to 3mm
Wiring, VCC, trig (control side), echo (receiving end), GND Ground
This product uses the method: a control port made a high of more than 10US, you can wait to receive high output port. One has
Output can open the elapsed timer, when this port goes low when you can read the timer value, this time as the distance of the time,
Before calculating the distance. This constant cycle of measurement, you can reach the value of the mobile measurement ~ ~
(1) The IO trigger distance, high-level signal to at least 10us;
(2) the module automatically sends eight 40khz square wave, automatically detects whether a signal return;
(3) a signal back, through the IO outputs a high level, the duration of high level is
Ultrasonic time from launch to return. Test distance = (time * High speed of sound (340M / S)) / 2;
Arduino code:
int inputPin = 4; / / define the ultrasonic signal reception interface
int outputPin = 5; / / define the ultrasonic signal is issued Interface
int ledPin = 13;
void Setup ()
{
Serial.begin (9600);
pinMode (ledPin, OUTPUT );
pinMode (inputPin, INPUT );
pinMode (outputPin, OUTPUT );
}
void loop ()
{
digitalWrite (outputPin, LOW ); / / send the emitted ultrasonic signal interface low 2μs
delayMicroseconds (2);
digitalWrite (outputPin, HIGH ); / / send the emitted ultrasonic signal interface high 10μs, here is the least 10μs
delayMicroseconds (10);
digitalWrite (outputPin, LOW ); / / send out ultrasonic signal interface to maintain low
int Distance = pulseIn (inputPin, HIGH ); / / read-out pulse time
distance = distance/58; / / the pulse time into Distance (unit: cm)
Serial.println (Distance); / / output distance value
delay (50);
IF (Distance> = 50)
{/ / if the distance is greater than 50 cm of small lights
digitalWrite (ledPin, HIGH );
} / / If the distance is less than 50 cm small lights extinguished
else
digitalWrite (ledPin, LOW );
}
* 세금계산서 발행방법은 게시판 공지사항 참조.
* 기술문의는 이메일(master@toolparts.co.kr)로 문의.
전자부품 특성상 제품에 이상이 있거나, 상품정보와 상이한 경우 외 에 단순 고객변심으로는
교환 반품이 불가능 합니다 구매전 이점 유의해 주세요!!!
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)