E-Max 35A V2
1Specification
1.1 Output : Continues 350 A, Burst 40 A up to 10 Secs
1.2 Input Voltage : 5.6V --- 16.8V ( L ithium : 2s ~ 4s or NiMH/NiCd 5 -12 Cells)
1.3 BEC (Battery Elimination Circuit) Output : linear mode BEC 3A / 5V
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5 Size : 28mm*45mm*12mm (width*length*height)
1.6 Weight : 38g
1.7 Packaging include:
3 sets of gold plated motor connectors and heat-shrink tubings
(Remark: motor connectors and heat-shrink tubings need to be purchased additionally)
2 Features
2.1 Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after
batteryconnected.
This will prevent any injury happened.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity,
fully compatible with all market available transmitters.
2.3 Programmable Items :
∵ Brake Settings : brake enabled / brake disabled, default is brake disabled
∵ Battery Type : Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd) , default is Li-xx.
∵ Low Voltage Protection Mode(Cutoff Mode) : power reducing / power cutoff, default is power reducing.
∵ Low Voltage Protection Threshold(Cutoff Threshold) :
low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery , number of battery cells are judged automatically ,
low / medium / high cutoff voltage for each cell are: 2.6V/2.85V/3.1V. For example: 3 Cells Li-Poly,
when medium cutoff voltage is set, the cutoff voltage is: 2.85*3=8.55V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage
(0% means the low voltage cutoff protection function is disabled) .
For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V,
when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V.
∵ Startup mode: normal / soft / super-soft, default is normal startup.
∵ Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors.
But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above.
For higher speed, High timing could be used.
2.4 Full P rotection F eatures: Low-voltage cutoff protection / over-heat protection / throttle signal
lost protection.
3 Advantages
3.1 Military Standard Capacitor with extremely low resistance used on voltage input section,
this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance, super current endurance.
3.3 Microprocessor and BEC use separate voltage regulator IC, with good anti-jamming capability.
* 세금계산서 발행방법은 게시판 공지사항 참조.
* 기술문의는 이메일(master@toolparts.co.kr)로 문의.
전자부품 특성상 제품에 이상이 있거나, 상품정보와 상이한 경우 외 에 단순 고객변심으로는
교환 반품이 불가능 합니다 구매전 이점 유의해 주세요!!!
고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.
무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 7일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.
교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내
교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
(예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
(자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)
※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
(색상 교환, 사이즈 교환 등 포함)